2.6" Fiberglass Dual Deploy Screech
Big and Awesome
Posted by East Coast Rob on 28th Feb 2017
I was lucky enough to buy this kit for a great price during Madcow's Black Friday sale. The rocket was easy to put together considering it's my first fiberglass rocket kit. The parts were high quality, the only part I found to have an issue was the coupler for the bay. The coupler's walls are thicker than the payload and sustainer tubes. I had to sand the coupler down to match their diameters. The fins and body tubes are so smooth, I don't even think I will have to prep them that much. The rocket is a good size, tall, and wide. I can't wait to paint this rocket and launch it for the first time this season!
Posted by Dave on 12th Aug 2015
Fun to build, fun to fly. I've had it up four times - Loki K1127, Aerotech J510, Loki J1026 and another K1127. All over Mach 1 and around 8600' or so.
2.6" Fiberglass 5:1 Von Karman Filament Wound Nosecone
2.6" Filament Wound Fiberglass Airframe 32"
2.6" Filament Wound Fiberglass Airframe 16"
2.6" Filament Wound Fiberglass Coupler 6"
2.6" Filament Wound Fiberglass Spacer Ring 1"
38mm or 54mm Filament Wound Fiberglass Motor Mount
G10 1/16" Fiberglass Fins
G10 Fiberglass Centering Rings (2)
G10 Fiberglass Bulk Plates
Kevlar Shock Cord (2)
Hardware Pack (1/4-20 Eyebolt (4), 1/4-2 Nut (5), 1/4" Washer (3), 10-24x7 Threaded Rod (2), 10-24 Nut (6), #10 Washer (6), Rivet (4), Rail Buttons and screws (2))
Motor Mount: 38mm or 54mm
Fins: 3 each 1/16" G10
Optional Recovery System:
PLEASE NOTE: this is an unpainted rocket. The tubing included in this kit is semi-transparent red and a black nose cone. In order to finish the rocket like the one in the photo, you will need to add a painted finish.
This kit is made to order will not ship immediately.
Motor Retainer Not Included.