Loading... Please wait...

2.6" Carbon FIber DD DX3 ™

Roll over to magnify and click to enlarge
  • Image 1

Product Reviews

Write Review

  1. Beautiful tough rocket that can take a pounding.

    Posted by J. Huszczo on 29th Jun 2019

    The finished product is quite spectacular. But wouldn't recommend this rocket for those new to high power rocketry. The instructions are not very detailed, but with some experience you should be able to figure out what you need to. You are basically on your own on how to mount a shock cord. The fins and fin slots did require some alteration. Carbon fiber has it's own foibles (radio opaque) but is VERY tough. Fun build and great flyer. 54" MMT allows big motors for very high flights in this light rocket.


Out of Stock

Product Description


Pre-Slotted 2 Part Carbon Fiber Airframe
New Carbon Fiber Removable Altimeter Bay Kit
Includes Altimeter Hardware (eyebolts, Threaded Rods, Rivets).
Includes Plywood Altimeter Sled
Included Upgrade - Aluminmum Altimeter Bay Bulk Plates
5:1 Ogive Thin-Wall Filament Wound Fiberglass Nose Cone with Composite Tip
Carbon Fiber Fins
G10 Motor Tube and Centering Rings
Rail Buttons
2 Nylon Shock Cords


Length: 62"
Diameter 2.6"
Motor Mount: 54mm
Fins: 3 each 1/8" Carbon Fiber

Optional Recovery System:

Nylon Chute 15" (Drogue)
Nylon Chute 30" (Main)
Chute Blast Protector 9" x 9" (2)

Optional Tether System:

Kevlar Tether 9/32 Inch - 2 Looped Ends (2)


Download assembly instructions

Download altimeter bay kit instructions