- Home
- Kits
- Kits by Type
- Sport
- 1.6" Fiberglass Rapton
1.6" Fiberglass Rapton
Product Reviews
-
This thing is tough!!
Posted by Rick Sorber on 1st Aug 2018
Not too hard a build. The fins slots needs some opening up, but nothing major. I’ve had some issues flying it. Not the rocket’s fault, stuff just happens. First flight, the 300 lb. shock cord broke exactly at the loop. The chute sailed off to who knows where, while both halves of the rocket did a free fall from about 1000 feet. No damage! Flight two, the ejection charge never fired until it was on the ground. The entire nose cone and about two more inches were stuck in the dirt. I dug it out and wiped off the mud, good as new! It can really take a beating!
Product Description
Kit includes:
38mm Black 5:1 Conical Filament Wound Nosecone / Red Tip
38mm G12 Yellow Thin Wall Fiberglass Airframe 24 inches
38mm G12 Yellow Fiberglass Coupler 6 inches
38mm G12 Yellow Thin Wall Fiberglass Airframe 12 inches
29mm Motor Mount G12 Fiberglass 8 Inches
3 Black G10 Fiberglass 1/16" Thick Fins
G12 Fiberglass AV_Bay Lids
G12 Fiberglass Centering Rings
G10 Fiberglass Bulk Plate
This Kit Features
Dual Deploy Standard
Precision routed fin slots
Florescent Yellow Thin Wall Tubing (light Weight)
Flies on anything from an F to an I
Weight Just over 1 Lb
Just over 44 Inches Tall
Fiberglass design