1.6" Fiberglass Mini Tomach Dual Deploy ™
Good little dual deploy kit
Posted by NZ Rocketeer on 4th Apr 2016
The kit is easy to build and has a nice dual deploy altimeter bay. There is some thought you have to do on how to get everything into the altimeter bay, but I did. There is some filing of the fin slots to get the fins to sit properly, but no real issues. I took this out for its first flight on Sunday. It went up 1,380 feet on an Aerotech G77-7R. Unfortunately the main did not deploy (my fault) an it came down on the 10" drogue. The nose cone was damaged on hitting a rock, but the rest of the rocket is ready to go again. I will be flying this again soon and buying a bigger version shortly.
38mm Fiberglass 5:1 Von Karman Filament Wound Nosecone
38mm Filament Wound Fiberglass Airframe 22"
38mm Filament Wound Fiberglass Airframe 16"
38mm Filament Wound Fiberglass Coupler 6"
38mm Filament Wound Fiberglass Spacer Ring 1"
29mm Filament Wound Fiberglass Motor Mount
G10 1/16" Fiberglass Fins
G10 Fiberglass Centering Rings (2)
G10 Fiberglass Bulk Plates (3 Coupler, 2 Airframe)
Kevlar Shock Cord (2)
Hardware Pack (10-24 Eyebolt (3), 10-24 Nut (3), #10 Washer (3), 8-32x7 Threaded Rod (2), 8-32 Nut (6), #8 Washer (6), Rivet (2), Rail Buttons and screws (2))
Motor Mount: 29mm
Fins: 1/16" G10