Raven 3 Altimeter

Roll over to magnify and click to enlarge

Reviews
Videos

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

$201.50

Brand:

SKU:

RAVEN-3

Quantity:

Product Description

Raven3 Features:

Lots of high-quality recorded data:

400 Hz axial accelerometer, +/- 70 Gs

200 Hz lateral accelerometer, +/- 35 Gs

250 G single-axis accelerometer available as an option

20 Hz Baro data, +/- 0.3% accuracy!

20 Hz voltage on each of 4 deployment outputs

40 Hz output current

20 Hz high-precision temperature sensor

20 Hz for All flight events used for deployment logic.

Flight counter

All output program settings

Accelerometer calibrations used during the flight

Pad altitude ASL

8 minutes of high-rate data+ 45 minutes for each flight. The newest 5 flights are stored. (New faster download!)

4 high-current, programmable outputs:

Two 30+ Amp outputs and two 9-Amp outputs compatible with batteries from a single Li-Poly cell to a 20V pack.

Default output settings:

Mach-immune, accelerometer-based apogee deployment

Main deployment at 700 feet

Baro-based backup apogee deployment

Backup deployment 1.5 seconds after main deployment

Additional user-selectable output logic options can be selected in combination for each output:

Accel > user value 1 (ignition detection)

Accel < user value (burnout detection)

Filtered pressure increasing (baro apogee detection)

Filtered pressure decreasing (for staging)

Time > user value (simple timer)

Time < user value (vertical staging check)

Altitude < user value 1 (low altitude deploy)

Altitude > user value 2 (vertical staging check)

Altitude < user value 3 (landing detection) (New!)

Velocity < 0 mph (apogee detection)

Velocity < user value 1 (Mach inhibit)

Velocity > user value 2 (staging input)

Time delay after other conditions met (backup)

See FIP page for programming screenshot

All of the above flight events are recorded at 20 Hz in the Flight Event Register, great for verification of the altimeter functions in test flights or simulated flights.

Screw terminal with 0.1 spacing

Only 1.80 long x 0.8 wide x 0.55 thick!

Simulated test flight:

A sophisticated built in test exercises all sensors and all outputs with a realistic simulated flight. Verify that your ematches work with your battery, verify your flight program, and view all the recorded data from your flight without leaving your computer.

Compatible with the Featherweight Interface Program

The Raven has full functionality with either end up!

Visible and audible readout of individual channel continuity and battery voltage.

User-calibration of accelerometer