Loading... Please wait...

1.6" Fiberglass Mini Tomach Dual Deploy

Roll over to magnify and click to enlarge
  • Image 1
  • Image 2
  • Image 3

Product Reviews

Write Review

  1. Good little dual deploy kit

    Posted by NZ Rocketeer on 4th Apr 2016

    The kit is easy to build and has a nice dual deploy altimeter bay. There is some thought you have to do on how to get everything into the altimeter bay, but I did. There is some filing of the fin slots to get the fins to sit properly, but no real issues. I took this out for its first flight on Sunday. It went up 1,380 feet on an Aerotech G77-7R. Unfortunately the main did not deploy (my fault) an it came down on the 10" drogue. The nose cone was damaged on hitting a rock, but the rest of the rocket is ready to go again. I will be flying this again soon and buying a bigger version shortly.


Product Description


Fiberglass 5.5:1 VK Nose Cone
Pre-Slotted Lightweight Thin-Wall Fiberglass Airframe
Altimeter Bay
G10 Fins and Centering Rings
Kevlar/Nylon Shock Cord


Length: 42.5"
Diameter 1.6"
Weight: 18oz
Motor Mount: 29mm
Fins: 1/16" G10

Optional Recovery System:

18" Quality Nylon Chute (1)
10" Drogue Chute (1)
6x6 Chute Protector (2)

Optional Tether System:

These Shock Cords are about as good as it gets. They are 100% Kevlar! The loops are sewn at both ends with High Performance Kevlar thread then further protected and strengthend with a high heat protective shielding. The shielding protects the loop/thread plus also prevents fraying of the ends.  One tether has one end open to attach to the motor tube.  Tether is rated @ 1200lbs.  Tether is approximately 10' long.  Comes standard with a 600Lb Swivel at one end.

Download assembly instructions

Download altimeter bay instructions

Download RockSim file