Loading... Please wait...

1.6" Fiberglass Mini DX3 Dual Deploy

Roll over to magnify and click to enlarge
  • Image 1
  • Image 2
  • Image 3

Product Reviews

Write Review


    Posted by Ed on 22nd Mar 2016

    Could be 5 stars. This is another quality build. I flew it first on an F52 and my motor eject went 3 seconds into the flight. It was sceamin upward when the chute blew but all held together. Second deploy soon after. I thought for sure it would have separated with the violent deploy. Happy to recommend this kit with the available options.It gets an H motor next time :)


Product Description


Fiberglass 4:1 Ogive Nose Cone
Pre-Slotted Lightweight Thin-Wall Fiberglass Airframe
Altimeter Bay
G10 Fins and Centering Rings
Kevlar/Nylon Shock Cord


Length: 37"
Diameter 1.6"
Weight: 16oz
Motor Mount: 29mm
Fins: 1/16" G10

Optional Recovery System:

18" Quality Nylon Chute (1)
10" Drogue Chute (1)
6x6 Chute Protector (2)

Optional Tether System:

These Shock Cords are about as good as it gets. They are 100% Kevlar! The loops are sewn at both ends with High Performance Kevlar thread then further protected and strengthend with a high heat protective shielding. The shielding protects the loop/thread plus also prevents fraying of the ends.  One tether has one end open to attach to the motor tube.  Tether is rated @ 1200lbs.  Tether is approximately 10' long.  Comes standard with a 600Lb Swivel at one end.

Download assembly instructions

Download altimeter bay instructions

Download RockSim file