Loading... Please wait...

1.6" Fiberglass Mini Frenzy Dual Deploy ™

Roll over to magnify and click to enlarge
  • Image 1
  • Image 2

Product Reviews

Write Review

  1. Great Starter Rocket

    Posted by Mark on 20th Jul 2017

    I purchased and built this as my first fiberglass model. I had a great time with it. Because the F level motors don't give a whole lot of thrust I had more reliable flights flying it is a single deploy without the upper tube.

  2. Fun Build

    Posted by rharshberger on 12th Mar 2017

    Just finishing up the build on this fun little rocket. Assembly was pretty much by the instructions. The only fitting that I had to do was to open up the fin slots a bit as they were too tight to for the fin to slide into, the kit came with everything but the motor retainer and parachutes, it did include all the hardware, removable rivets, and recovery harness materials. I have seen a couple of these rockets flown at our clubs launches and they fly beautifully. The Altimeter bay will take a bit of pre-thought to make work as its very tight, I used a Eggfinder Quantum and a LiPo, with the sled mounted on only one all-thread so that the other passed above the altimeter and battery. This is my second Frenzy rocket and I really enjoy them.

$99.00
Brand:
SKU:
K-3185

Product Description

Kit Includes:

38mm Fiberglass 5:1 Von Karman Filament Wound Nosecone
38mm Filament Wound Fiberglass Airframe 18"
38mm Filament Wound Fiberglass Airframe 12"
38mm Filament Wound Fiberglass Coupler 6"
38mm Filament Wound Fiberglass Spacer Ring 1"
29mm Filament Wound Fiberglass Motor Mount 
G10 1/16" Fiberglass Fins
G10 Fiberglass Centering Rings (2)
G10 Fiberglass Bulk Plates (3 Coupler, 2 Airframe)
Kevlar Shock Cord (2)
Hardware Pack (10-24 Eyebolt (3), 10-24 Nut (3), #10 Washer (3), 8-32x7 Threaded Rod (2), 8-32 Nut (6), #8 Washer (6), Rivet (2), Rail Buttons and screws (2))

Specifications:

Length: 39"
Diameter 1.6"
Weight: 16oz
Motor Mount: 29mm
Fins: 1/16" G10

Optional Recovery System:

Nylon Chute 10" (Drogue)
Nylon Chute 18" (Main)
Chute Blast Protector 6" x 6" (2)

PLEASE NOTE: this is an unpainted rocket.  The tubing included in this kit is semi-transparent red and a black nose cone.  In order to finish the rocket like the one in the photo, you will need to add a painted finish. 

This kit is made to order will not ship immediately.

Motor Retainer Not Included.

Download assembly instructions

Download altimeter bay instructions